My phone was drenched in water yesterday, I kept it in a bag of rice to dry, now there’s white screen.. help!!?
My problem is a bit different from other white screeen problems on the internet. The buzz is a ASUS P320 touch screen PDA. As soon as I place the battery, a white light flashes from bottom left. I dont even switch it on, the light is there as soon as I place the battery. I just bout this one, please let me know if this can be solved, or i am in deep shit 
Related posts:
- pantech phone with a split screen how do i fix it?
- Panasonic Phone with no display on handset screen?
- I just got new blackberry, How do I set up which applications is displayed on the Home screen?
- What nokia phone is skinny and large screen?
- Is it possible to use a stylus instead of my fingers to type on htc touch screen phone?
Try my steps below too. You can try a new battery in the buzz and your buzz might return to normal.I got my buzz wet once before.Poped a new battery in it & worked fine after.
(1) IMMEDIATELY REMOVE THE BATTERY. VERY VERY IMPORTANT!
(2) As soon as possible (preferably within 20-30 minutes). dissassemble the buzz using Torx T6 screwdriver. (Get this off eBay or service depots, etc) Make an emergency trip to Sears/RadioShack/ACE/service railroad station/etc.
(3) Clean/dry as much as you can, using Q-Tips
(4) Dry the electronics components under a desk lamp on a paper towel for 24 hours.
(5) Use a blow dryer, set on warm. Blow dry the buzz. Make sure your battery and sim card are out of the buzz.
(6) Place your buzz in rice for 24 hours w/ battery and sim out
(7) Reassemble the buzz
(8) Place back together
(9) Only now it’s safe to place the battery back in.
You can also leave the battery and sim out. Leave your buzz out in the sun. Let it dry.